Technical Manual
LED-Indicator
SCN-LED55.01/SCN-GLED1x.01
MDT technologies GmbH •
51766 Engelskirchen • Papiermühle 1
Phone: +49-2263-
880 • Fax: +49-2263-4588 • [email protected] • www.mdt.de
13
13
Delete alarm
▪
automatically
▪
delete with
attendance
Determining how the alarm to be reset:
Automatic: alarm is reset immediately
when alarm is no longer active
Clear with attendance: The alarm is
cleared only if the absence is turned off
Monitoring for objects
▪
no alarm
▪
send Timeout
alarm at object
failure
Sets whether an alarm should be
triggered when cyclical monitoring for an
LED fails.
Table 3: General settings
The relevant communication objects for the general settings are shown in the following table:
Number
Name
Length Usage
36
Day/Night
1 Bit
Switching between Day/Night
37
All LEDs
–
Block object 1 Bit
blocks all LEDs
38
Absent
1 Bit
switches the absent function and so the alarms are
switched on
136
Operating
1 Bit
sends a 1-telegram in the adjusted time periods if the
device is active
Table 4: General communication objects
