MDT Technologies AKK-03UP.02, Technical Manual

Page: 35 / 78

Technical Manual Switch Actuator 3-fold, FanCoil
MDT technologies GmbH
•
51766 Engelskirchen
•
Papiermühle 1
Tel.: +49-2263-
880 • Fax: +49
-2263-4588
• knx@mdt.de • www.m
dt.de
35
The following table shows the available settings:
ETS-text
Dynamic range
[default value]
comment
Behavior at locking

On

Off

no change
Behavior at activating the
locking function
Behavior at unlocking

Off

start time of staircase
light
Behavior at deactivating the
locking function
Table 24: Behavior at locking/unlocking
A Channel is locked by sending a logical 1 to the locking object and further control is no longer
available as long as the channel is locked. By sending a logical 0 the channel can be unlocked again.
The following actions can be performed at locking/unlocking:

no change
The channel stays in the current state.

On
The channel is switched on.

Off
The channel is switched off.

start time of staircase light
The channel is switched on for the time of the staircase light.
The following table shows the communication object:
Number Name Length Usage
4 Lock 1 Bit Object for locking the channel
Table 25: Communication object locking function
5.3.4 Behavior at bus power down/bus power up
The following figure shows the available settings:
Figure 20: Behavior at bus power down/bus power up