Technical Manual Switch Actuator 3-fold, FanCoil
MDT technologies GmbH
•
51766 Engelskirchen
•
Papiermühle 1
Tel.: +49-2263-
880 • Fax: +49
-2263-4588
• [email protected] • www.m
dt.de
28
5.2.8 Logic functions
If the logical function is enabled, the following submenu for the logical function is shown:
Figure 13: Logic functions
The logic function can be activated with one or two additional logic objects. The logical function AND,
OR, XOR and Gate-functions are available:
Figure 14: Logic function -> schematic diagram
The logical functions switch the output if the followings conditions are true:
AND
All inputs are active (=1).
OR
At least one input is active (=1).
XOR
Only one input is active (=1).
Gate opened with logical functions = 0
The output can be switched via the switching object if all logic objects have the value 0.
Gate opened with logical functions = 1
The output can be switched via the switching object if all logic objects have the value 1.
Summary of Contents for AKK-03UP.02
Page 6: ......
