Opera system
Analogue Phone user guide
21
6.1.34 Meet-Me
Conference
Room
There are two Meet-Me Conference Rooms, each able to support a 7 party conference.
You can enter the conference room by dialling the conference room number. By default these are
700 and 701.
You may be required to dial a PIN number if the conference room is PIN protected.
The conference room parameters can be programmed though the browser based programming by
clicking on the link’Meet Me Conference’.
The Conference Rooms may be programmed into the Ringing Assigmenets or the Auto Attendant.
6.1.35 Account Codes
You may associate an account code of up to 10 digits with a phone call for billing purposes. The
account code is inserted into the call data record which is then exported to a billing application.
Outgoing Call:
•
Lift hand to receive internal dial tone
•
Dial Line access digit.
•
Dial #3 followed by the Account Code followed by *
•
Now dial external number.
•
Incoming Call:
•
While connected to an external party
•
Put the caller on hold by press Hold key to receive internal dial tone.
•
Dial #3 followed by the Account Code followed by *
•
You will receive internal dial tone. Now press the Hold keyto return
to your caller or dial an extension number to transfer the call.
Redial Buffer
The Last Number Redial buffer will hold all digits dialled on the line. If you make a call by dialling
0 to get the line and then #3123* to set the account code and then the external number 8160000,
the redial buffer will contain #3123*8160000. If you redial this buffer entry you will ring 816000
with account code 123 assigned to the call.
Speed Dial Numbers
You can pre-assign an accounts code to a speed number, by adding the account code to the start
of the speed dial number, i.e. if you had a speed number 8160000 and you wonted to always
assign the account code 123 to calls made to that number, you would change the speed dial
number to #3123*8160000.
On Hook Dialling
For on-hook dialling operation, you can dial the line access code followed by the account code
followed by the external number, and then lift the handset or press the green key to make the
call.
i.e. dial 0#3123*8160000 the lift handset or press the green key to make the call.
