
MDS 05-3305A01, Rev. B
MDS 4710/9710 I/O Guide
21
DUMP Details page 26
Display all programmable settings.
HREV Details page 26
Display the Hardware Revision level.
INIT Details page 26
Set radio parameters to factory defaults.
INIT [4710/9710] Details
page 26
Configure radio for use without P-20 chassis.
Restores certain transceiver defaults before using
the INIT x720 command.
INIT [4720/9720] Details
page 27
Configure radio for use with P-20 chassis.
KEY Details page 27
Key the radio (transmitter ON). This is generally a
radio test command.
MODEL Details page 27
Display the model number of the radio.
MODEM [xxxx, NONE]
Details page 27
Set the modem characteristics of the radio.
OWM [XXX...] Details page
27
Set or display the owner’s message.
OWN [XXX...] Details page
27
Set or display the owner’s name.
PTT [0–255] Details page
27
Set or display the Push-to-Talk delay in
milliseconds.
PWR [20–37] Details page
27
Set or display the transmit power setting.
RSSI Details page 28
Display the Received Signal Strength Indication.
RTU [ON/OFF/0-80] Details
page 28
Re-enables or disables the radio’s internal RTU
simulator and sets the RTU address.
RX [xxx.xxxx] Details page
28
Set or display receiver frequency.
RXTOT [NONE, 1-255]
Details page 28
Set or display the value of the receive time-out
timer.
SCD [0-255] Details page
29
Set or display the Soft-carrier Dekey delay in
milliseconds.
SER Details page 29
Display the radio serial number.
SHOW [DC, PORT, PWR]
Details page 29
Display the DC voltages, diagnostics port, and
transmit power level.
SREV Details page 29
Display the Software Revision Level.
STAT Details page 29
Display radio status and alarms.
TEMP Details page 30
Display the internal temperature of the radio in
degrees C.
TOT [1-255, ON, OFF]
Details page 30
Set or display the Time-out Timer delay in
seconds.
TX [xxx.xxxx] Details page
30
Set or display the transmit frequency.
UNIT [10000...65000]
Details page 30
Set or display the transceiver’s unit address.
Table 7. Command summary (Continued)
Command name
Function