Charging Description
Interface Functions Description
Power Button
Any device with discharge function can charge the projector. In switched off condition,
charging the projector takes about 150 minutes.
The power button lights red during charging.
When the battery is full，the power button lights in red and blue color.
The Projector’s working time is about 110 min with a fully charged battery.
The working time is about 80 min with EZCast function.
Please switch the selection key to charging mode and then connect the projector to the device.
If you need the projector to project at the same time, please press the power button on.
This projector can be used as a power bank to charge other digital devices via the USB cable.
HDMI/MHL port on the back side
The Apple special HDMI cable is required to connect any Iphone/Ipad.
HDMI cable (not included)
HDMI/MHL port on the back side
Android mobile phone: MHL cable is required to connect.
Any digital device which supports MHL,
can synchronize with the projector by connecting it through the corresponding required cable.
USB Port
MHL
Any digital device which supports HDMI,
can synchronize with the projector by connecting it through the corresponding required cable.
Summary of Contents for Pocket Projector
Page 1: ...User Manual...
