DESCRIPTION
This submersible sewage pump is designed for pumping sewage, effluent, wastewater or flooded water with up
to two-inch solids. The pump is built with overload thermal protections and auto reset. Ball bearings on motor
shafts never need lubrication.
The MD500T is equipped with a 10’ 3-prong grounding-type power cord pump is a manual pump, a switching
device is required.
The MD500T-G is equipped with a 10’ 3-prong grounding-type power cord and tethered float switch.
The MD500T-V is equipped with a 10’ 3-prong grounding-type power cord and vertical float switch.
The MD500T-G and MD500T-V pumps operate automatically.
This pump has not been tested or approved for use in swimming pools or in salt-water marine areas. It is also
not engineered to be run continuously as a “fountain” or “waterfall” pump.
Do not pump flammable or explosive liquids such as oil, gasoline, kerosene, ethanol, etc. Do not
use in the presence of flammable or explosive vapors. Using this pump with or near flammable
liquids can cause explosion or fire, resulting in serious personal injury or death and/or property
damage.
SPECIFICATIONS
Power supply required ................................................................................. 115V, 60 HZ
Water temperature range ............................................................................ Max.190°F (88°C)
Individual branch circuit required ................................................................ 15 Amp minimum
Discharge Connection ................................................................................. 2” FNPT
Motor duty ................................................................................................... Continuous
Power cord .................................................................................................. SJTW 18AWG/3C, 10ft
NOTICE:
This unit is not designed to be used to pump salt water or brine! Use with salt water or brine
will void warranty.
CONSTRUCTION
Motor housing ..................................................................................... Cast Iron
Motor cap ............................................................................................ Cast Iron
Volute .................................................................................................. Cast Iron
Impeller ............................................................................................... Reinforced thermoplastic vortex
2
Warning
