16 VITEACARE.COM
MODEL: JUNIOR PLUS 2 & 3
LANGUAGE: ENGLISH VERSION: 2020-11
LENGTH OF THE FOOTREST ADJUSTMENT
• The footrest has a five stage length adjustment. Every 25 mm.
• To change the length of the footrest, unscrew the knob of length adjustment, remove the
black plate securing the screw, and then unscrew the screw (Figure 24.)
• Select required length of the footrest, by using the holes in the footrest frame.
• Next, insert the screws into the holes, screw the footrests length adjustment knobs and
secure them with the black plates.
• It is important that each side of the screws were placed in holes at the same height.
Fig 24.
Footrest length adjustment knob
• The stroller is equipped with a headrest that can be placed in two positions.
• To change the position of the head stabilizer, unfasten the velcro fasteners of head
stabilizer at the rear part of the upholstery, select the appropriate location of the head
stabilizer. Drag velcro headrest through the holes in the top of the backrest upholstery, then
fasten velcro.
ADJUSTMENT OF THE HEADREST SETTING
• To change angle of the BACKREST TILT, adjust the belts of backrest adjustment. (Figure
25.) To do this, press the button on the buckle and slightly tilt it to the rear (Figure 25). The
backrest will start to fall. When you set a desired angle, release the button.
• If you want to tilt the backrest forward, press the button and pull the strap below at the
same time.
ADJUSTMENT OF THE BACKREST TILT ANGLE
Summary of Contents for DRVG0C
Page 29: ...Instrukcja u ywania...
