Q
K
K
K
Q
Q
Q
AA
AA
AA
AA
AA
AA
Unscrew the four Round head bolts (P) and lock washers (AA) and remove
the front panel assembly.
Move the spring frame (M) to the lowest level.
STEP 1.
STEP 2.
* All of the parts and hardware you will need are supplied with the crib at the time of purchase.
Crib (5971) - Daybed Conversion Assembly
The intended user's minimum age must be at least 15 months old and maximum
weight must not exceed 50 lbs (22.7 kg).
The mattress intended for use on the bed shall be a full-size mattress having
minimum dimensions of 51 5/8" (1310 mm) in length, 27 1/4"(690 mm) in width
and 4" (100 mm) in thickness and not exceeding 6" (152 mm).
WARNING :
Failure to follow these warnings and the assembly instructions could result in
serious injury or death from entrapment or strangulation.
DO NOT place bed near windows where cords from blinds or drapes may strangle a child. DO NOT place
items with a string, cord, or ribbon, around a child’s neck, such as hood strings or pacifier cords. DO NOT
suspend strings over a toddler bed for any reason. If guard rails are used as the mattress containment
means, guard rails provided must be used to avoid the formation of a gap between the mattress and the bed
that could cause an entrapment.
Page 8
STEP 3.
Check to make sure that all of the bolts are fastened securely.
Do not overtighten.
The guard rail can be installed with the high end facing either to the left or the right.
Attach the guard rail (K) to the side panel posts using four 1-3/4” Allen head bolts (Q) and lock washers (AA).
