1. Find a clean, level place to begin the assembly of your Billiard Table. The table will be assembled upside down
and then turned over on its legs once the assembly is completed. This game table is heavy, and turning it over
will require at least four strong adults.
2. Remove all the parts from the box and verify that you have all of the listed parts as shown on the parts list
pages. Carefully cut or tear the four corners of the box so that the bottom of the box can be used as your
work surface.
ASSEMBLY INSTRUCTIONS:
www.themdsports.com
1639634
4
(Continued on the next page.)
1639634 PRE-INSTALLED PARTS
F5x2-1/2” Screw
Corner Pocket
Adjustable “L” Bracket
P1
P2
x16
x2
x4
P3
Side Pocket
P4
x2
5/16” Nut
P5
P6
x16
Leg Top Board
x4
FIG.1
3. Apply the Glue (#15) into the grooves of the Side and End Top Boards (#4 and #6).
See FIG. 1A.
4. Reverse the Side Top Boards (#4) and attach to the Lower Side Aprons (#5) using six Screws (#20) per Side
Top Board.
See FIG. 1.
5. Reverse the End Top Boards (#6) and attach to the Lower End Aprons (#7) using three Screws (#20) per End
Top Board.
See FIG. 1.
FIG. 1
4
5
6
7
15
X 2
X 2
X 2
X 2
X 1
20
X 18
15
20
6
7
4
6
/
20
4
5
FIG. 1A
