MD Helicopters CSP-900RMM-2, Servicing And Maintenance

Page: 305 / 2144

CSP − 900RMM − 2 MD Helicopters, Inc.
Rotorcraft Maintenance Manual
Page 205/(206 blank)
Original
10-20-00
J. Blade Covers
(Ref. Figure 202)
Special Tools
(Ref. CSP − SPM)
Item Nomenclature
T2011 Blade Covers
The MD Explorer standard blade covers
(T2011) are cut full to avoid trim tab damage.
A small opening at the tip of the cover allows
for air circulation and drainage. The covers are
of medium weight nylon and weigh approxi­
mately
eight pounds (3 kg) .
(1). Blade covers (7) can be installed with or
without tiedowns, and tied down at any
convenient spot on the ground with the
aid of a lightweight rope attached to
the open end.
(2). Tighten covers (7) at blade root with
attached straps and buckles.
(3). The small opening at the blade tip
bottom allows attachment of tiedown
ropes.
K. Blade Covers (Cold Weather)
(Ref. Figure 202)
Special Tools
(Ref. CSP − SPM)
Item Nomenclature
T2012 Blade Covers (Cold Weather)
The MD Explorer cold weather blade covers (8)
are similar to the standard blade covers, but
are fitted with full length zippers and heater
hose boots near the blade root.
9G10 − 002
6
5
8
2
1
7
4
3
1. NOTAR BOOM COVER (T2009)
2. NOTAR THRUSTER COVER (T2010)
3. PITOT COVER (T107)
4. BUBBLE COVER CANOPY (T109)
5. ROTOR HUB COVER (T2007)
6. ENGINE AREA COVER (T2008)
7. BLADE COVERS (T2011)
8. COLD WEATHER BLADE COVERS (T2012)
Figure 202. Helicopter Protective Covers