MD Helicopters 369-500, Maintenance Instructions Manual

Page: 556 / 722

CSP-HMI-3
MD Helicopters, Inc
.
MAINTENANCE MANUAL
[ Main Menu ]
[ HMI − 3 Book TOC ]
[ Chapter 96 TOC ]
Page 220
Revision 11
96-40-00
The information disclosed herein is proprietary to MD Helicopters, Inc.
Neither this document nor any part hereof may be reproduced or transferred to
other documents or used or disclosed to others for manufacturing or any other
purpose except as specifically authorized in writing by MD Helicopters, Inc.
Copyright
©
1999 − 2016 by MD Helicopters, Inc.
K101 RELAY
K101 RELAY
2 EA. REQ.
INSTRUMENT
PANEL LOWER
SECTION, LEFT
SIDE PANEL
INSTRUMENT PANEL
LOWER SECTION
RIGHT SIDE PANEL
(NOTES 3, 4)
2 EA. REQ.
PILOT'S UTILITY
LIGHT SWITCH
TIGHTENING
HOLE (2 PLCS)
RETAINING
RING
MAP CASE
TRIM COVER
(NOTE 2)
LAMP BODY
NOZZLE
ASSEMBLY
LANDING LIGHT RELAY
PILOT'S UTILITY LIGHT
(NOTE 1)
NOTES:
1. LAMP REPLACEMENT IS IDENTICAL TO THAT
SHOWN IN VIEW C.
2. FOR INFORMATION, REFER TO CHAPTER 25.
3. FOR INFORMATION, REFER TO CHAPTER 12.
4. ON 369D S/N 1150 & SUBS, AND ALL 369E/FF
HELICOPTERS, LANDING LIGHT RELAY IS MOUNTED
OUTSIDE LEFT OF LOWER CONSOLE SUPPORT ASSY.
5. AT INSTALLATION, TRIM LENGTH TO CLEAR PANEL.
6. FURNISHED WITH BOLT LIGHT.
7. 36 IN. (91.44 CM) LONG, #20 AWG WIRE LEAD.
8. BLUE/WHITE GE NO. 327 LAMP (OR EQUIVALENT)
FURNISHED
9. COMPONENTS OF GRIMES HALF-FIXTURE LIGHT
ASSEMBLY. G96-4005-1A
Figure 207. Interior Lights and Components (Sheet 1 of 2)