MD Helicopters 369-500, Maintenance Instructions Manual

Page: 144 / 722

CSP-HMI-3
MD Helicopters, Inc
.
MAINTENANCE MANUAL
[ Main Menu ]
[ HMI − 3 Book TOC ]
[ Chapter 95 TOC ]
Page 904
Revision 7
95-10-20
The information disclosed herein is proprietary to MD Helicopters, Inc.
Neither this document nor any part hereof may be reproduced or transferred to
other documents or used or disclosed to others for manufacturing or any other
purpose except as specifically authorized in writing by MD Helicopters, Inc.
Copyright
©
1999 − 2016 by MD Helicopters, Inc.
G95-1018A
POST
LIGHT
3.480 INCH
(8.8392 CM)
0.2
R
REMOVE
NUTPLATE
3.160 INCH
(8.0264 CM)
3.440 INCH
(8.7376 CM)
1.580 INCH
(4.0132 CM)
3.160 INCH
(8.0264 CM)
(TYP)
0.095 R
MAX
TYP.
ATTITUDE GYRO CUTOUT
INSTRUMENT PANEL
MODIFICATION OF ANGLES
REMOVE NUTPLATE, FILL RIVET HOLES, ENLARGE
SCREW HOLES TO 0.189-0.193 INCH
(4.8006-4.9022 MM) DIA. (2 PLCS),
INSTALL RIVNUTS OR NUT-BLINDS
ANGLE
ANGLE
CUT
2.62 INCH (6.6548 CM)
1.31 INCH (3.3274 CM)
0.030 INCH
(0.762 MM)
(TYP)
PANE
L
0.12 R MAX
(TYP)
Figure 902. Modification of ‘‘T’’ and Nutplate Removal