PELLET STOVES
Chapter 4
USE AND MAINTENANCE MANUAL
page
33
Operation
Technical dept. - All rights reserved by MCZ Group S.p.A. - Reproduction prohibited
4.6.
SETTINGS TO IMPLEMENT BEFORE THE FIRST
START-UP
Once the power supply cable at the rear of the stove is connected, turn
the switch (again at the rear) to position
(I).
The illuminated button will light up and LED
C
on the emergency panel
will turn red (LIGHT PERMANENTLY ON)
4.6.1.
Adjusting the current time and day
Pressing button
no. 4
and
no. 6
on the remote control at the same
time
for 3 seconds
while the stove is on will open the current time
and date adjustment menu.
When
“CLOCK”
appears on the display you can select the current time
using button
no. 5
and confirm it using button
no. 6.
You can then
select and confirm the minutes using button
no. 6
then set the day.
When you have finished setting the date and time press button
no. 6
again to confirm all the settings and exit the menu.
The days of the week are indicated by the following abbreviations:
MO
= Monday
TU
= Tuesday
WE
= Wednesday
TH
= Thursday
FR
= Friday
SA
= Saturday
SU
= Sunday
If the keypad is not pressed for 7 seconds the remote
control automatically exits the time adjustment
mode and confirms the most recent data entered.
4.6.2.
Setting the unit of temperature measurement
You can select the unit of temperature measure depending on whether
the International or Anglo-Saxon measuring system is used.
The unit of temperature measurement can only be selected
when the stove is off.
To select the unit, press button
no. °4 for at
least 5 seconds.
You can select either Celsius (
°C
) or Farenheit (
°F
).
The standard setting for the remote control is degrees Celsius
(°C)
4.7.
FIRST START-UP
4.7.1.
Start-up/ shutdown via the remote control
The stove can be switched on and off (and therefore also the remote
control display by
pressing button no. 3 on the remote control for
1 second.
After a start-up phase of about 15 minutes, the stove runs
regularly.
After the stove is shut down by pressing button
3
the cooling procedure
begins. This includes suspension of fuel filling, cleaning of the brazier
3