863-669
© Firma WJG, Braunschweig. Nachdruck oder Vervielfältigung nur mit ausdrücklicher Genehmigung
Owners Manual
Hifi-Amplifier„AMP-400SI“
Introduce
Dear customer,
we gratulate of getting your new Hifi Amplifier!
With this choice you have decited to a product which
combines good design and practical technical features.
Please read the following advice carefully and work
accordingly to these advice to get troubleless fun with
the unit.
Features
•
Toroid Transformer Power Supply to increase
Power efficiency factor
•
Digital time delay karaoke mixer
•
Independent microphone volume
•
Control and echo-adjustment
•
Power Peak Meter
•
Karaoke mixer
•
5 channel Amplifier
Savety Device
•
Do not put the system near to water and humidity.
•
Avoid place the system to moisture or excessive heat or direct sun.
•
Take care for a good ventilation and do not cover the heat-sink-slots in the housing.
•
Connect the system to a 230V power plug with a groundet protective-conductor only.
•
To put system from a cold to a warm room cause humidity to the system, therefore
wait for a definied time of 2 to 3 hours before use after transport.
•
The power cord of the appliance shold be unplugged from the power plug when left
unused for a long period of time.
•
To open system for service is only allowed certyfied personal only.
Specifications:
Output Power Max:
Distortion:
Frequency Range:
Power Input:
Signal to Noise Ratio:
Input Sensivity:
Treble Tone Control:
Bass Tone control:
Load Impedance:
2x 140W +3x40W at 8 Ohms
< 0,5 % at rated power
20-20.000Hz
220-250VAC/50-60Hz
200mV
> 85dB
± 8dB at 10KHz
± 8dB at 100Hz
4-8
Ohms
