MAGNUM KEYPAD/DISPLAY
REVISION 2.2
9
3.1. UNIT STATUS (WTD/ACT)
3.2. UNIT STATUS (KW/TON)
Chapter - 3. Status Screens
Pressing the Menu Key- Status
•
Results in displaying the 10 available Menu
items. The highlight is on the Status display.
•
To select any item use the ▲ ▼ ◄ ► arrow
keys to position the highlight and press
↲
.
•
To understand the options select F1 for help.
•
To display the current Status Screens press the
Enter Key.
Press
↲
Unit Status WTD/ACT
•
On the top line right chiller out & chiller in is
displayed rounded to a whole number.
•
The second line shows system status
.
•
The third line shows mode & time in that mode.
•
The next two lines show the following:
-Steps wanted on -Steps actually
on -Wanted capacity % -Integration
delay -Rate of change.
•
The next line shows the current target.
Press F3 PG
i
Unit Status KW/TON
•
On the top line right chiller out & chiller in is
displayed rounded to a whole number.
•
The second line shows Unit status.
•
The third line shows time in that mode.
•
The next two lines show the following:
-Current amps
-Current voltage
-Current KW
-Current tons
-Current KW/Ton
•
This information is only available if the sensors
are provided.
Press F3 PG
i
