![MCS BOX DRIVE Manual Download Page 4](http://html1.mh-extra.com/html/mcs/box-drive/box-drive_manual_1756238004.webp)
Manually load up to 6 paintballs into your paintball gun for every
revolution of the thumbwheel. This can be done to chronograph your
marker without the need to turn on the Box Drive, or to feed
paintballs if your batteries should happen to die during a game.
Clear a ball jam in your Box Drive during a game by rotating the Wheel
Drive backwards and clearing the jam, then forwards again to load the
ball stack.
6. General Maintenance
Emptying the Box Drive for Storage
With the Box Drive turned off, turn it upside down to dump the paintballs out. While upside down,
rotate the Wheel Drive backwards from the feeding direction to release paintballs. Do not store your
Box Drive with any paintballs left inside.
NOTE:
When storing the Box Drive for an extended period of time, remove the batteries and store it
in a dry place.
Cleaning The Box Drive:
To clean the Box Drive, use only a clean, dry cloth, or apply a small amount of goggle lens cleaner to
a clean, dry cloth and wipe clean. Do not apply goggle lens cleaner directly to Box Drive surfaces, as
too much contact will deteriorate plastic and cause damage.
If any paintballs break inside the Box Drive; do not use any liquids or chemicals to rinse out the Box
Drive, doing so will cause severe damage to the Box Drive electronics.
3