McQuay MDS080B, Installation Manual

Page: 23 / 31

©2005 McQuay International
22
8
．
． ．
．
5 IP address setting:
With set each indoor unit address code, user can define each indoor unit connecting with a same outdoor unit as indoor unit NO.0,1,2,3….
User can set the indoor unit address code by setting the SW2 switch on the control module PCB board of the indoor unit. As following:
Code
SW
2.1
SW
2.2
SW
2.3
SW
2.4
SW
2.5
SW
2.6
Code
SW
2.1
SW
2.2
SW
2.3
SW
2.4
SW
2.5
SW
2.6
Code
SW
2.1
SW
2.2
SW
2.3
SW
2.4
SW
2.5
SW
2.6
Code
SW
2.1
SW
2.2
SW
2.3
SW
2.4
SW
2.5
SW
2.6
0 0 0 0 0 0 0 12 0 0 1 1 0 0 24 0 1 1 0 0 0 36 1 0 0 1 0 0
1 0 0 0 0 0 1 13 0 0 1 1 0 1 25 0 1 1 0 0 1 37 1 0 0 1 0 1
2 0 0 0 0 1 0 14 0 0 1 1 1 0 26 0 1 1 0 1 0 38 1 0 0 1 1 0
3 0 0 0 0 1 1 15 0 0 1 1 1 1 27 0 1 1 0 1 1 39 1 0 0 1 1 1
4 0 0 0 1 0 0 16 0 1 0 0 0 0 28 0 1 1 1 0 0 40 1 0 1 0 0 0
5 0 0 0 1 0 1 17 0 1 0 0 0 1 29 0 1 1 1 0 1 41 1 0 1 0 0 1
6 0 0 0 1 1 0 18 0 1 0 0 1 0 30 0 1 1 1 1 0 42 1 0 1 0 1 0
7 0 0 0 1 1 1 19 0 1 0 0 1 1 31 0 1 1 1 1 1 43 1 0 1 0 1 1
8 0 0 1 0 0 0 20 0 1 0 1 0 0 32 1 0 0 0 0 0 44 1 0 1 1 0 0
9 0 0 1 0 0 1 21 0 1 0 1 0 1 33 1 0 0 0 0 1 45 1 0 1 1 0 1
10 0 0 1 0 1 0 22 0 1 0 1 1 0 34 1 0 0 0 1 0 46 1 0 1 1 1 0
11 0 0 1 0 1 1 23 0 1 0 1 1 1 35 1 0 0 0 1 1 47 1 0 1 1 1 1
User can set the outdoor address code by setting the S2 switch on the PCB board of outdoor unit. The code as following:
Code S2.4 S2.5 S2.6 S2.7 S2.8 Code S2.4 S2.5 S2.6 S2.7 S2.8 Code S2.4 S2.5 S2.6 S2.7 S2.8 Code S2.4 S2.5 S2.6 S2.7 S2.8
0 0 0 0 0 0 8 0 1 0 0 0 16 1 0 0 0 0 24 1 1 0 0 0
1 0 0 0 0 1 9 0 1 0 0 1 17 1 0 0 0 1 25 1 1 0 0 1
2 0 0 0 1 0 10 0 1 0 1 0 18 1 0 0 1 0 26 1 1 0 1 0
3 0 0 0 1 1 11 0 1 0 1 1 19 1 0 0 1 1 27 1 1 0 1 1
4 0 0 1 0 0 12 0 1 1 0 0 20 1 0 1 0 0 28 1 1 1 0 0
5 0 0 1 0 1 13 0 1 1 0 1 21 1 0 1 0 1 29 1 1 1 0 1
6 0 0 1 1 0 14 0 1 1 1 0 22 1 0 1 1 0 30 1 1 1 1 0
7 0 0 1 1 1 15 0 1 1 1 1 23 1 0 1 1 1 31 1 1 1 1 1
Indoors quantity connected (outdoor S1:3~8)
：
Qua-
ntity
S1.3 S1.4 S1.5 S1.6 S1.7 S1.8
Qua-
ntity
S1.3 S1.4 S1.5 S1.6 S1.7 S1.8
Qua-
ntity
S1.3 S1.4 S1.5 S1.6 S1.7 S1.8
Qua-
ntity
S1.3 S1.4 S1.5 S1.6 S1.7 S1.8
1 0 0 0 0 0 0 13 0 0 1 1 0 0 25 0 1 1 0 0 0 37 1 0 0 1 0 0
2 0 0 0 0 0 1 14 0 0 1 1 0 1 26 0 1 1 0 0 1 38 1 0 0 1 0 1
3 0 0 0 0 1 0 15 0 0 1 1 1 0 27 0 1 1 0 1 0 39 1 0 0 1 1 0
4 0 0 0 0 1 1 16 0 0 1 1 1 1 28 0 1 1 0 1 1 40 1 0 0 1 1 1
5 0 0 0 1 0 0 17 0 1 0 0 0 0 29 0 1 1 1 0 0 41 1 0 1 0 0 0
6 0 0 0 1 0 1 18 0 1 0 0 0 1 30 0 1 1 1 0 1 42 1 0 1 0 0 1
7 0 0 0 1 1 0 19 0 1 0 0 1 0 31 0 1 1 1 1 0 43 1 0 1 0 1 0
8 0 0 0 1 1 1 20 0 1 0 0 1 1 32 0 1 1 1 1 1 44 1 0 1 0 1 1
9 0 0 1 0 0 0 21 0 1 0 1 0 0 33 1 0 0 0 0 0 45 1 0 1 1 0 0
10 0 0 1 0 0 1 22 0 1 0 1 0 1 34 1 0 0 0 0 1 46 1 0 1 1 0 1
11 0 0 1 0 1 0 23 0 1 0 1 1 0 35 1 0 0 0 1 0 47 1 0 1 1 1 0
12 0 0 1 0 1 1 24 0 1 0 1 1 1 36 1 0 0 0 1 1 48 1 0 1 1 1 1
●
For combined unit, set the master unit’s S2.1 as 1, and set the slave unit’s S2.1 as 0 ;
●
One address code can not be used twice, and to set the first units as 0;address and indoors quantity code of the slave unit is no need to set ;
●
Only after setting up address code, to power on to start the units ; outdoor unit (single or master one) address code is used for monitoring
multi-set units simultaneously by software.
●
1 stand for ON, 0 stands for OFF;
8
．
． ．
．
6 Setting address code with remote controller :
For indoor unit with remote controller, users can set the indoor unit address code with the remote controller:
Press the “KEY1” on the indoor unit PCB (“ON/OFF” on MWM-T series) for 5s until the unit indicator lights up, meaning having entered the
set mode. Set the running mode of the unit as “COOL” with the remote controller, and then the user can set the unit address code by setting the
fan-mode and setting-temperature with the remote controller. Different fan-mode and setting-temperature means different indoor address code;
Addr. Code Fan Setting Temp. Setting Addr. Code Fan Setting Temp. Setting Addr. Code Fan Setting Temp. Setting
0 Low Fan 16 16 Mid Fan 17 32 High Fan 18
1 Low Fan 17 17 Mid Fan 18 33 High Fan 19
2 Low Fan 18 18 Mid Fan 19 34 High Fan 20
3 Low Fan 19 19 Mid Fan 20 35 High Fan 21
4 Low Fan 20 20 Mid Fan 21 36 High Fan 22
5 Low Fan 21 21 Mid Fan 22 37 High Fan 23
6 Low Fan 22 22 Mid Fan 23 38 High Fan 24
7 Low Fan 23 23 Mid Fan 24 39 High Fan 25
8 Low Fan 24 24 Mid Fan 25 40 High Fan 26
9 Low Fan 25 25 Mid Fan 26 41 High Fan 27
10 Low Fan 26 26 Mid Fan 27 42 High Fan 28
11 Low Fan 27 27 Mid Fan 28 43 High Fan 29
12 Low Fan 28 28 Mid Fan 29 44 High Fan 30
13 Low Fan 29 29 Mid Fan 30 45 AUTO 16
14 Low Fan 30 30 High Fan 16 46 AUTO 17
15 Mid Fan 16 31 High Fan 17 47 AUTO 18