www.mcohome.com User Manual
MCOHome Technology Co., Ltd
3
MH7-WH-WT15
N
、
L
、
COM
、
NO
、
NC
、
T
、
T
Thermostatic
valve/electric
ball /pump
TT terminal is to be
connected with an
external ambient
temperature sensor
10A
MH7-EH-WT15
N
、
L
、
OUT
、
T
、
T
Heating film
、
electric
radiator
，
heating cable
ect
TT terminal is to be
connected with an
external ambient
temperature sensor
16A
Button & Display
Operation
On/Off operation
When power on, thermostat displays “OFF”
，
all outputs are forced off. Touch S3 button to
switch (manual/off/auto) mode, then press S2 to confirm and proceed power on/off setting. After
power on, device displays current week, local time, working mode, current temperature, output
status etc.
Note:After the backlit goes out, please press the button to light up the backlit first, then press the
button again for corresponding operation.
Temperature setting
In normal working status, press S4 or S5 button will enter into temperature setting interface.
The setting range is 5-37
℃
（41-99℉）.
Then press S4 or S5 can adjust the value. Press S3 or wait
25 seconds without any key operation will save the setting and return back to the normal operation
interface.
Auto Mode:
The changed value only valid in the current time period for this time, and
the device will not effect the preset time period value .
Manual Mode:
The changed value will be valid until next setting.
Vacation Mode:
The changed value will be valid until next setting.
