User Manual
8
COMMAND_CLASS_THERMOSTAT_MODE_V2,
THERMOSTAT_MODE_REPORT
When thermostat
mode changes
COMMAND_CLASS_THERMOSTAT_OPERATING_STA
TE, THERMOSTAT_OPERATING_STATE_REPORT
When thermostat
status changes
COMMAND_CLASS_THERMOSTAT_SETPOINT_V2,
THERMOSTAT_SETPOINT_REPORT_V2
When
temperature
setpoint changes
Command Class supported by the device:
(All CC supports S2 unauthenticated level)
COMMAND_CLASS_VERSION,
COMMAND_CLASS_MANUFACTURER_SPECIFIC,
COMMAND_CLASS_POWERLEVEL,
COMMAND_CLASS_ASSOCIATION,
COMMAND_CLASS_ASSOCIATION_GRP_INFO,
COMMAND_CLASS_BASIC,
COMMAND_CLASS_FIRMWARE_UPDATE_MD
COMMAND_CLASS_SENSOR_MULTILEVEL_V5,
COMMAND_CLASS_THERMOSTAT_SETPOINT,
COMMAND_CLASS_THERMOSTAT_MODE,
COMMAND_CLASS_THERMOSTAT_OPERATING_STATE,
COMMAND_CLASS_THERMOSTAT_FAN_MODE,
COMMAND_CLASS_THERMOSTAT_FAN_STATE,
COMMAND_CLASS_SUPERVISION,
Command Class supported by the device:
(Not supports S2)
COMMAND_CLASS_ZWAVEPLUS_INFO
COMMAND_CLASS_TRANSPORT_SERVICE
COMMAND_CLASS_SECURITY_2
Note:
Basic CC is used to control energy saving mode and comfort mode:
·
Basic Set (Value = 0x00) = Set Off Mode
·
Basic Set (Value = 0xFF) = Set Auto Mode
·
Basic Get = Get Report
·
Basic Report (Value = 0x00) = Report off Mode
·
Basic Report (Value = 0xFF) = Report other Modes
Restoring Factory Settings:
1
、
Remove the device out from Z-Wave network can restore factory setting.
2
、
Configure the parameter 10 in secret menu can restore the factory setting also. Please use this
procedure only when the network primary controller is missing or otherwise inoperable.
1-year Limited Warranty
MCOHome warrants this product to be free from defects in material and workmanship under
normal and proper use for one year from purchase date of the original purchaser. MCOHome will, at its
option, either repair or replace any part of its products that prove defective by reason of improper
workmanship or materials. THIS LIMITED WARRANTY DOES NOT COVER ANY DAMAGE TO
THIS PRODUCT THAT RESULTS FROM IMPROPER INSTALLATION, ACCIDENT, ABUSE,
MISUSE, NATURAL DISASTER, INSUFFICIENT OR EXCESSIVE ELECTRICAL SUPPLY,
ABNORMAL
MECHANICAL
OR
ENVIRONMENTAL
CONDITIONS,
OR
ANY
UNAUTHORIZED DISASSEMBLY, REPAIR OR MODIFICATION. This limited warranty shall not
apply if: (i) the product was not used in accordance with any accompanying instructions, or (ii) the
product was not used for its intended function. This limited warranty also does not apply to any product
on which the original identification information has been altered, obliterated or removed, that has not
been handled or packaged correctly, that has been sold as second-hand or that has been resold contrary
to Country and other applicable export regulations.
