www.mcohome.com User Manual
MCOHome Technology Co., Ltd
3
Byte
Name
1
COMMAND_CLASS_MULTI_CHANNEL
2
MULTI_CHANNEL_CMD_ENCAP
3
Source End Point
4
Destination End Point
5
COMMAND_CLASS_SWITCH_BASIC or COMMAND_CLASS_SWITCH_BINARY
6
BASIC_SET/BASIC_GET or BINARY_SET/BINARY_GET
7
Value ( 0xFF -- ON 0x0 -- OFF )
Refer to “Z-Wave Command Class
”
for detail information, or consult the information provided by
controller/ gateway manufacturer.
Multi Channel Association
To set association groups by the command “COMMAND_CLASS_MULTI_CHANNEL_
ASSOCIATION”.
The switch supports 3 association groups. The first two groups are used for switching associated
devices
（
switch N controlling group N
），
and each group can support up to 5 nodes or terminals. The
3rd association group is used for reporting devices’ state to the controller if any changes happen. This
group supports one node, which defaults to controller node.
For the first two groups, the touch panel switch will send basic set command to related
association groups when setting switch state by gateway or key-pressing. Then the switch states of
associated devices and their related key will be synchronic. For the 3rd group, a report will be sent to
associated controller by it when any state changes happen in other groups.
Restoring Factory Settings
Pls follow the EXCLUDING operation to restore the factory setting.
Safety Notice
1. Flush-mount only into a UL/ETL/CE certified plastic junction box. The minimum size should be
86*86*60mm, minimum Volume is 443cm
3
.
2. Use Copper Conductors Only.
3. CAUTION - Risk of Electric Shock - More than one disconnect switch may be required to
de-energize the equipment before servicing.
1-year Limited Warranty
We warrant this product to be free from defects in material and workmanship under normal and proper use for one
year from purchase date of the original purchaser. We will, at its option, either repair or replace any part of its products
that prove defective by reason of improper workmanship or materials. THIS LIMITED WARRANTY DOES NOT
COVER ANY DAMAGE TO THIS PRODUCT THAT RESULTS FROM IMPROPER INSTALLATION, ACCIDENT,
ABUSE, MISUSE, NATURAL DISASTER, INSUFFICIENT OR EXCESSIVE ELECTRICAL SUPPLY,
ABNORMAL MECHANICAL OR ENVIRONMENTAL CONDITIONS, OR ANY UNAUTHORIZED
DISASSEMBLY, REPAIR OR MODIFICATION. This limited warranty shall not apply if: (i) the product was not used
in accordance with any accompanying instructions, or (ii) the product was not used for its intended function. This
limited warranty also does not apply to any product on which the original identification information has been altered,
obliterated or removed, that has not been handled or packaged correctly, that has been sold as second-hand or that has
been resold contrary to Country and other applicable export regulations.
