www.mcohome.com User Manual
MCOHome Technology Co., Ltd 2013
2
Step2 Wiring
1. Connect Hot Line to “Power L”.
2. Connect Neutral Line to “Power N”.
3.
Connect Load wire to “Load L”.
4.
External switch connection
：
Connect both wires with two terminals of “Switch”.
Note
：
“
3V
”
and
“
GND
”
will
only
be used with MCOHome touch panel.
Step3 Mounting In-Wall Box
Mount wall switch and cover plate back to the in-wall box.
Step4
Restoring Power
Restore power at circuit breaker or fuse.
Installation is complete.
Operation
INCLUDING the Mini Energy Switch into your network:
1.
Set the controller into INCLUSION mode. Follow the instructions provided by the controller
manufacturer.
2.
Press the ON/OFF/PROGRAM button on the Mini Energy Switch, or toggle the external
switch/button 6 times in quick succession (within approx 2sec).
Note: If the inclusion is successful, the Mini Energy Switch INDICATION LED will be solid on or off
depending on switch’s state. If not, INDICATION LED will blink slowly.
