User Manual
MCOHome Technology Co., Ltd
www.mcohome.com
2
Installation & Wiring
g
Location:
Thermostat is suggested to be installed indoor, a place with around 1.5m height above the floor
where represents the average room temperature. It should be away from direct sunlight, any cover, or
any heat source, to avoid false signal for temperature control.
CAUTION: Cut off power supply at circuit breaker or fuse before installation to avoid fire, shock
Or death!
Step 1: Remove the steel frame from the device, and secure it
onto the junction box with two screws.
Step 2: Insert all wires into the right terminals and tighten
screws. The wiring diagram is shown below.
Step 3: Attach the wired device on “A” points of the steel frame
as shown first, and then push the whole device into junction box.
Step 4: Confirm the device is well mounted, power on and it is
ready to operate.
Button & Display
y