Extreme 7" Monitor/DVR System
© 2019 McNeilus Truck and Manufacturing, Inc.
41
Preco PreView Radar System
Preco Electronics
TM
PreView
®
Radar Systems For Front and Side Loader
Applications Only
Street Smart Vision Systems are compatible with PreView
®
Radar System by Preco Electronics
TM
.
Use kit PN 1479540 for Front and Side Loader refuse vehicles.
READ AND UNDERSTAND THESE INSTALLATION INSTRUCTIONS BEFORE INSTALLING PRECO
PREVIEW RADAR SYSTEM.
Perform your company’s Lockout/Tagout procedure. If your company does not
have a Lockout/Tagout procedure, follow OSHA 1910.147 and 1910.146 Confined Space as appropriate.
McNeilus Kit Number 1479540
Item
Part Number
Description
Qty.
1
1483929
Sensor
1
1-1/4" x 10-24 Bolts
4
1-1/4" x 10-24 Locking Hex Nuts
4
1-1/4" x 10-24 Flat Washers
4
Sensor Bracket
1
Sensor Drill Template
1
2
1483927
VideoLink
1
1/4-20 x 1-1/2" Cap Screws
2
1/4" x 1-1/2" Screw
2
1/4" x 1-1/2" Flat Washers
2
1/4-20 Nylock Nuts
2
3
1483944
Buzzer Kit (24V buzzer, red and black wire, terminals)
1
4
1483945
Body Cable, 75' (22.86 M)
1
5
1483928
Cab Adaptor Cable, 16' (4.9 M)
1
6
1483926
Monitor Adaptor/ Cable, 59" (1500 mm)
1
Installation Instructions
•
Mount the Single PreView
®
Sensor
1. Select a location for the sensor that is on the rear of the
vehicle, centered, and approximately 3 ft (1 M) up from the
ground (see Figure 22).
• Make sure the sensor is mounted perpendicular to the
ground with the "PreView" logo readable.
Before permanently mounting the sensor to the
vehicle, ensure it provides a clear detection zone.
In the proposed location, temporarily attach the
sensor and turn the system on to verify nothing is
detected in the zone. Reposition the sensor in
another location until nothing is detected in the zone.
IMPORTANT
PreView
Sensor mounted 3ft
(1M) from ground
Camera
Figure 22
