McNeilus HD Rear Loader, Operator'S Manual

Page: 105 / 132

© 2008 McNeilus Truck and Manufacturing, Inc.
Rear Loader
91
Preventive Maintenance
6. Open the side door (Figure 46, Item 2)
1
2
Figure 46
7. Inspect behind the ejector for accumulation of trash.
8. Remove trash from behind the ejector using a clean out
tool or plastic shovel.
9. After trash is removed, close and secure the side door,
fold up the ladder, and lock it in place.
10. Remove your company’s Lockout/Tagout per your
company’s procedure. If your company does not have
a Lockout/Tagout procedure, follow OSHA 1910.147
Lockout/Tagout and 1910.146 Confined Space as
appropriate.
3.7 Safety Signs
• Daily Checks - A complete walk around of the vehicle
to inspect safety signs should be performed every day
before operation. If any safety signs are damaged,
illegible, or missing, they must be replaced before
operation.
For the proper location and part numbers of safety signs for
the refuse vehicle (see Section 4.1 Safety Sign Locations).
If you are unable to determine the proper safety sign or its
placement on the refuse vehicle, call McNeilus Truck and
Manufacturing, Inc. at 888-686-7278. If any safety signs on
the equipment are not clearly readable, contact McNeilus
Parts and Service at 888-686-7278 or
www.streetsmartparts.com to order replacements. Use only
McNeilus replacement safety signs.
For information on any of the chassis safety signs, please
contact the chassis manufacturer.