Page 5
QUICK START
SMARTFIND GMDSS NAVTEX is extremely easy to operate:
Apply equipment connections (page 25)
Apply power at the vessels power switch panel
The SMARTFIND GMDSS NAVTEX will start up after a few seconds delay
Set UTC time and date (automatic when connected to GNSS / GPS)
Select antenna configuration as passive or active (page 18)
The SMARTFIND GMDSS NAVTEX will now start to receive and display
NAVTEX messages dependent on the transmission schedule of the NAVTEX
stations within the vessels current region.
Note: It may be several hours before the first message is received; this is dependent
on NAVTEX transmission coverage provided locally.
Take the time to read this manual carefully as it contains essential information
regarding the operation and maintenance of the SMARTFIND GMDSS NAVTEX and
a useful background to the NAVTEX system.
Should you have any questions, or require advice regarding Orolia products our
website ‘frequently asked questions’ is a good place to start. From the web site you
can also leave a message for our customer service team, visit;
www.mcmurdomarine.com
Page 6
ABOUT SMARTFIND GMDSS NAVTEX
The SMARTFIND GMDSS NAVTEX has been designed to meet the requirements of
IMO (International Maritime Organisation) MSC.148 (77) and IEC technical standard
61097-6 (Ed 2.1).
The SMARTFIND GMDSS NAVTEX has three separate receiver channels, one each
tuned to 490 kHz, 518 kHz and 4209.5 kHz. The SMARTFIND GMDSS NAVTEX will
receive on all three frequencies simultaneously in those parts of the world where
transmissions are available (refer to page 43).
The SMARTFIND GMDSS NAVTEX can be set up to filter out stations and/or
message categories that are not required by the User.
The SMARTFIND GMDSS NAVTEX is capable of being connected to an Integrated
Bridge System (IBS), transferring NAVTEX messages to other navigational aids if
required. Note that the IBS must be compliant with the serial port requirements of
IEC 61097-6 (Ed 2.1).
The SMARTFIND GMDSS NAVTEX will accept UTC time & date information via
either COM port if available. UTC time & date will be used to timestamp received
NAVTEX messages.
Permanent installation of the SMARTFIND GMDSS NAVTEX can be made with either
the bulkhead-mounting bracket or the flush panel mounting kit provided.
The NAVTEX antenna should be mounted where it is elevated clear of metal objects
in a location where it cannot easily be damaged.
