mcmurdo R5 GMDSS VHF User Manual Download Page 18

Page: 18 / 46

Operation

Using Dual watch

To activate

Dual watch, press the

SCN

key.

The display shows “

Dual

” at the top and “

” at the bottom right.

The radio toggles between the selected channel and channel 16.

•

To terminate

Dual watch, press

SCN

again.

Scanning channels

•

To activate

scanning memory, press 2 times

SCN

within 2 seconds.

During scanning, the display shows “

” in the channel field. The

radio toggles between channel 16 and each of the channels marked
for scanning.

•

To terminate

scanning, press

SCN

once.

Changing the transmitter power

To change

the transmitter power, press the

Hi/Lo

key. The display shows

“

” when power is set to low. Otherwise maximum power is used.

Locking the keypad

•

To lock

the keypad, press and hold the

Light/Lock

button. The display

shows a key symbol when the keypad is locked.

•

To unlock

the keypad, press and hold the

Light/Lock

button again.

0740

Summary of Contents for R5 GMDSS VHF















































Search results

Summary of Contents for R5 GMDSS VHF

Reviews:

Related manuals for R5 GMDSS VHF

Brands by name

Popular brands

mcmurdo R5 GMDSS VHF, User Manual

Search results

Summary of Contents for R5 GMDSS VHF

Reviews:

Related manuals for R5 GMDSS VHF

Brands by name

Popular brands