W r a p p i n g M a c h i n e M 2 3 0 - S A N D W I C H
Sec. 1 – General Information
Strada vicinale del campaccio, 1
First release
July 2017 Sec. 1 - Pag. 14
20014
– S. Ilario M.se di Nerviano
Tel: +39 0331 534.754 r.a.
– FAX: +39 0331 534.755
4.2.
C
ONTRAINDICATIONS
FORBIDDEN
Personnel who have not previously been informed and trained are forbidden from handling, installing,
using and performing maintenance on the machine.
It is forbidden to use the machine in an explosive (ATEX) or harsh atmosphere or where there is a
high concentration of dust or oily substances suspended in the air.
It is strictly forbidden to use the machine out of the above limits. It is particularly forbidden to perform
any processing adjustment or alteration to the machine if this should exceed the limits stipulated in
this document.
It is also forbidden to use the machine in the following conditions:
If it is left exposed to the elements;
With the safety devices excluded;
With electric jumpers and/or mechanical means which exclude utilities, safety or protection devices of
the machine itself;
For processing of materials other than those specified in this document;
Only personnel required by the production requirements are allowed to work on the machine during
the work cycle.
4.3.
E
XCLUSIONS
The EC Declaration of Conformity and use and maintenance instructions of this machine refer to the
equipment and devices listed and described in this document. Equipment that is not mentioned is
excluded from the liability of M.C.M. S.r.l.
4.4.
T
HE OPERATOR
REQUIREMENT
The operator (or handler) must be a diligent, responsible person who has understood and complies
with the information in this document.
The works manager of the operators must make sure that all personnel assigned to programming,
operation, maintenance or repairs have been adequately trained in order to operate the machine
safely.
Training must include:
An overview of the applicable safety procedures and recommendations provided in this document.
Knowledge of the signs on the machine;
A clear definition of the tasks assigned. Training on the duties and procedures to be followed when
performing the assigned duties;
The identification and explanation of all the command and control devices of the machine and their
relevant functions.
The identification and explanation of the securing procedures
The identification of the hazards associated with the tasks assigned and the method (including safe
working procedures) to be protected from the identified hazards;
The functional testing method or other ways to make sure the protections work properly
