Page <2>
V1.0
29/04/21
Newark.com/exclusive-brands
Farnell.com/exclusive-brands
Element14.com/exclusive-brands
Each speaker shares the following features:
•
Piezoelectric horn tweeters
•
Corner protectors
•
Recessed handles
• 1-3/8″ diameter pole mount
•
Metal grills
•
Heavy-duty MDF cabinets
• ¼″ input connections as well as binding posts
• One year limited warranty
Specifications
Part Number
Type
Woofer
Tweeter
Power
Capacity
(peak)
Frequency
Response
SPL
(W/M)
Imped-
ance
Dimensions
Inches
(H×W×D)
555-10300
Main Speaker
8"
Piezo Horn
300W
35Hz~20KHz 89dB
8Ω
17.5 × 11.5 × 10
555-10305
Main Speaker
10"
Piezo Horn
400W
30Hz~20KHz 90dB
8Ω
19.7 × 14.5 × 12.2
555-10310
Main Speaker
12"
Piezo Horn
500W
25Hz~20KHz 91dB
8Ω
21.6 × 15.4 × 14
555-10315
Main Speaker
15"
Piezo Horn
600W
20Hz~20KHz 92dB
8Ω
25 × 17.8 × 16
555-10317
Subwoofer
12"
N/A
600W
25Hz~800Hz 90dB
8Ω
16.9 × 15.3 × 14.4
555-10320
Subwoofer
15"
N/A
700W
20Hz~500Hz 91dB
8Ω
19.7 × 17.8 × 16.1
555-10325
Subwoofer
18"
N/A
1000W
20Hz~500Hz 92dB
8Ω
25.2 × 21.6 × 17.7
555-10330
Floor Monitor
10"
Piezo Horn
400W
30Hz~20kHz 90dB
8Ω
13.4 × 23.2 × 14
555-10335
Floor Monitor
12"
Piezo Horn
500W
25Hz~20kHz 91dB
8Ω
15 × 25 × 15.75
555-10340
Floor Monitor
15"
Piezo Horn
600W
20Hz~20kHz 92dB
8Ω
18.5 × 29 × 17
555-10345
Tweeter Array
N/A
(6) Piezo Horn
200W
1kHz~16kHz 89dB
N/A
5.4 × 19.5 × 9.8
555-10350
Tweeter Array
N/A
(5) Piezo Horn
600W
1kHz~20kHz 95dB
N/A
10.8 × 17.1 × 13.8
555-10290
Boom Box
12”
Piezo Horn
800W
30Hz~20kHz 92dB
8Ω
35 × 15.4 × 13.8
555-10295
Boom Box
15”
Piezo Horn
1000W
20Hz~20kHz 93dB
8Ω
41.7 × 18.1 × 15
Installation and Use
Connection and installation of these speakers is fairly straight forward. Each model includes a 1/4 jack and a pair of binding post
connections. Binding posts are positioned with standard spacing, so conventional speaker cables with paired banana plugs
may be used. Additionally, each binding post has a feed hole which will accept up to 12AWG wire. For prosound applications, it
is recommended that at least 16AWG wire be used for short lengths, longer lengths require 14AWG or 12AWG cable.
Binding post and 1/4” jacks are internally connected in parallel, and either may be used. Naturally, you would never connect
a single speaker to more that one amplifier, however these two connections may be utilized simultaneously to connect more
than one speaker to a single line. Note that most amplifiers are only capable of loads above 4Ω so only two speakers can be
connected to a single output.
Prior to connection to the amplifier, make certain that the amplifier is turned off, with the volume at the minimum setting. Attach
the speaker, using a proper speaker cable, turn on any source gear (mixer, cd player, musical instrument etc.), then turn on the
amplifier. Increase amplifier volume until sound reaches the desired level.
