5. As screws are tightened, the plastic mounting clips will rotate clockwise and draw in
against the inside of the wallboard. If using a drill to tighten screws, tighten all four until
the speaker frame just makes contact with the ceiling. From there, it is best to use a
hand screwdriver to fully tighten. This will prevent breakage of the plastic mounting clips.
6. In a cross pattern, (i.e. left, right, then up, down) tighten all four screws, by hand, until the
speaker frame is snug against the ceiling. Take care not to over-tighten as this may
damage the mounting clips or the mounting frame.
7. Once all screws are tightened, the grill may be reinstalled on the front of the speaker.
8. The other end of the speaker wire is now ready for connection to the sound source
Warranty
MCM Custom Audio products are warranted against manufacturer defects for a period of 12
months from the original date of purchase. This warranty is limited to manufacturer defects, in
either materials or workmanship. MCM an InOne company, or any other worldwide divisions of
Premier Farnell PLC, are not responsible for any consequential or inconsequential damage to any
other component, structure or the cost of installation or removal of said items.
This warranty will not cover damage due to improper use such as (an not limited to) damaged
cones, mounting frames, voice coils or items damaged by whether damaged items.
For questions or specific information regarding warranty replacement or repair, contact:
MCM, an InOne company
www.mcminone.com
800-543-4330
