MClimate Bobbie B-05, Installation Manual, Page: 6 / 24

Safety instructions
8. All connections to the controller must be carried out with cables with an insula-
tion resistance not less than those with PVC insulation T90 ° C when it is intended
to operate at ambient temperatures under 30 ° C and reaching 40 ° C, and with
cables with an insulation resistance not lower than those with PVC insulation T105
° C when the controller will operate at ambient temperatures under 40 ° C.
9. Тhe device must be installed vertically, with the power cables on the underside
of the device.
10. The controller is suitable for use in rooms, including bathrooms, in places
where it is not exposed to the direct impact of splashing water and water jets in
areas where the degree of protection IP23 is allowed.
11. The cables must be mounted with the plastic fastener bracket provided in the
kit.
12. Mount the protective plastic cover described in step 12 , indicating the
danger of dangerous voltages
13. In case of failure and burn of the built-in RF1 fuse resistor, the terminals of the
controller remain under dangerous voltage!
14. Mount Bobbie top cover and make sure it is securely attached to the base.
15. Do not install near sources of vibration.