McLelland CX-152, Reference Manual

Page: 8 / 9

CX-154 STEREO FOURTH-WAY
When stereo fourth-way operation is desired with the CX-154. There are no patch cords required. Plug the left
line-in and the right line in to input 1 and input 2 respectively. From the SUB OUT 1 and SUB OUT 2 attach a
cable to the input of the left and right sub frequency amplifiers. From the LOW OUT 1 and LOW OUT 2 attach
a cable to the input of the left and right low frequency amplifiers. From the MID OUT 1 and MID OUT 2
attach a cable to the input of the left and right mid frequency amplifiers. From the HIGH OUT 1 and HIGH
OUT 2 attach a cable to the input of the left and right high frequency amplifiers.
Frequency Response
Low Frequency Output +0 -0.5dB 10Hz
High Frequency Output =0 -1dB 20kHz
Total Hamonic Distortion
RL >2 kohms
Low
Specifications
Frequency Output < 0.01% THD
High Frequency Output < 0.02% THD
Maximum Output Level
RL>2 k ohms +21 dBu (6.2 volts) @
<0.5% THD 20-20kHz
Maximum Voltage Gain 6 dB
Constant - Directivity Corr 3 dB @ 3.5 kHz rising at
6dB/octave to 22.5 kHz
SOURCE
LINE-IN
HIGH AMP
1
0
POWER VOL
LOW AMP
1
0
POWER
MID AMP
1
0
POWER
1
0
SUB AMP
1
0
POWER VOL VOL VOL VOL VOL VOL VOL
RIGHT LEFT RIGHT LEFT RIGHT LEFT RIGHT LEFT
7
PDF created with FinePrint pdfFactory trial version http://www.fineprint.com