McLaren coupe series Owner'S Handbook Manual Download Page 115 | Manualshive

Page: 115 / 272

background image

Driving Controls

Driving Safety Systems

2.35

Driving on a significantly under-inflated tire
causes the tire to overheat and can lead to
tire failure. Under-inflation also reduces fuel
efficiency and tire tread life, and may affect
the vehicle’s handling and stopping ability.

WARNING: TPMS is not a substitute
for proper tire maintenance, and it is
the driver’s responsibility to
maintain correct tire pressure, even
if under-inflation has not reached
the level to trigger illumination of
the TPMS low tire pressure warning
light.

Each tire should be checked weekly when
cold and inflated/deflated to the inflation
pressure recommended on the tire inflation
pressure label.

Navigate through the ‘Vehicle Info’ screen on
the instrument cluster to view the current
tire pressures, see Vehicle Info, page 3.9.

The display shows the pressures of each of
the four tires. If the pressure figure appears
in green, no action is required. If it appears as
red text, inflate the associated tire to the
correct pressure as soon as possible.

Inspect the tire(s) for any possible causes of
reduced tire pressure.

WARNING: The tire pressures
indicated on the instrument cluster
will be more accurate with a
pressure gauge. The Tire Pressure
Monitoring System is not a
substitute for manually checking
tire pressures or checking for wear

and damage. The system only
provides a low tire pressure warning
and does not re-inflate the tires.

The Tire Pressure Monitoring
System cannot alert you to damage
to a tire. Regularly check the
condition of your tires.

WARNING: If low pressure warnings
occur frequently, have the tires
checked at your McLaren retailer.
Driving on an under-inflated tire will
causes the tire to overheat and can
lead to tire failure.

ENVIRONMENTAL: Under-inflated
tires reduce fuel efficiency and tire
tread life, and may affect the vehicle’s
handling and braking characteristics.

ENVIRONMENTAL: Check tire
pressures at least every 7 days.

Tire Temperature Monitoring System
operation

If a high tire temperature is detected, the
Tire Temperature Monitoring System will
display an error message on the instrument
cluster.

p13.book Page 35 Wednesday, April 26, 2017 9:22 PM

«
...
113
114
115
116
117
...
»

Summary of Contents for coupe series

















































































































































































































































































Reviews:

No comments

Related manuals for coupe series

Brand: Raven Pages: 24

Brand: Weather Guard Pages: 4

UNIVERSAL CJ-2A

Brand: Jeep Pages: 27

Brand: Jeep Pages: 228

Brand: Jeep Pages: 108

Brand: Jeep Pages: 525

Brand: Jeep Pages: 12

Brand: Jeep Pages: 6

Brand: Harman Kardon Pages: 16

Brand: TATA Motors Pages: 184

PW-50C Civilian

Brand: B&G electronics Pages: 7

Brand: Volvo Pages: 266

2005 JR41 Stratus

Brand: Dodge Pages: 293

2011 SRX CROSSOVER

Brand: Cadillac Pages: 416

Brand: TIE DOWN Pages: 2

Brand: Maserati Pages: 37

Brand: Toyota Pages: 26

Brand: TIS Pages: 6

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands