McLaren ARTURA, Owner'S Handbook Manual

Page: 122 / 326

Overview
The Driver Display is activated when the ignition
is switched on, see Switching on the ignition,
page 2.05.
WARNING: No messages will appear
on the Driver Display if there is a fault
with the screen or vehicle electrics.
Contact your McLaren retailer
immediately. Use of the vehicle in
these circumstances can be
dangerous.
WARNING: If the Driver Display
switches off while the vehicle is
being driven, adapt your driving style
and stop the vehicle as soon as safety
permits. Contact your McLaren
retailer.
Tachometer
The tachometer display appears in the centre of
the Driver Display when in Comfort or Sport
powertrain and handling modes. The red number
on the display indicates the engine’s maximum
RPM.
When Track powertrain or handling modes are
selected, the tachometer style will change to
suit the selected mode. See Display window,
page 3.19.
NOTE: The maximum RPM is dynamic
and will be reduced under certain
conditions, for example, if the engine
oil is below normal operating
temperature or if neutral gear is
selected.
NOTE: Do not operate the engine at or
near its maximum speed for a
significant length of time. The fuel
supply is cut off to protect the engine
when the maximum RPM is reached.
Shift lights
When Track powertrain or handling mode is
selected, shift lights will be displayed across the
top edge of the Driver Display. Shift lights
indicate the optimal time to change gear for
maximum performance. The shift lights are
arranged in three blocks; a green block, red block
and blue block. Each block illuminates as engine
RPM increases. Accelerating the engine speed
beyond the point that the blue block is
illuminated is not conducive to rapid acceleration.
3.02
Instruments
Overview
L