McLaren ARTURA, Owner'S Handbook Manual

Page: 61 / 326

Switching on the ignition
1. Ensure that the key fob is inside the vehicle.
2. To switch on the ignition without starting
the vehicle, press the
START/STOP button,
without depressing the brake pedal.
NOTE: If the vehicle is in Awake mode,
press the START/STOP button twice
with the brake pedal released.
3. The ignition will switch on, the oil
temperature, water temperature and fuel
gauges will operate and several of the
warning lights will illuminate as a self-test.
The Driver Display will fully illuminate.
Instruments and warning lights
Warning lights can be divided into different
categories, according to the colour that they
illuminate.
•
RED or AMBER warning light - indicates that
a fault has been detected. A fault indicated
by a RED light is more important than one
displayed in AMBER.
•
BLUE or GREEN notification light - indicates
that a system or feature is switched on and
operating.
Warning lights
Tyre pressure monitoring system
(TPMS), page 2.32
Seat belts, page 1.23
Rear fog lamp, page 1.36
Supplementary restraint system (SRS),
page 1.25
2.05
Driving Controls
Starting and Driving
R