McIntosh XRT2K Owner'S Manual Download Page 2

2

IMPORTANT SAFETY

INSTRUCTIONS!

PLEASE READ THEM BEFORE

OPERATING THIS EQUIPMENT.

WARNING - TO REDUCE RISK OF

FIRE OR ELECTRICAL SHOCK, DO

NOT EXPOSE THIS EQUIPMENT TO

RAIN OR MOISTURE.

NO USER-SERVICEABLE PARTS

INSIDE. REFER SERVICING TO

QUALIFIED PERSONNEL.

To prevent the risk of electric shock, do not remove cover or

back. No user serviceable parts inside.

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a non-abrasive dry soft cloth.
7. Install in accordance with the manufacturer’s

instructions.

8. This Loudspeaker is capable of producing

extremely high sound pressure levels, even
when connected to amplifiers of moderate
power output. User caution is advised. Ear
protection is recommended when playing at
high volumes as continued exposure to high
sound pressure levels can cause permanent
hearing impairment or loss. The use of a
Sound Level Pressure Meter will greatly aid in

determining

 when high volume levels are

occurring.

9. Do not install near any heat sources such as

radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.

10. Only use attachments/accessories specified by the

manufacturer.

11. Use only with the cart, stand, tripod, bracket, or

table specified by the manufacturer, or
sold with the apparatus. When a cart
is used, use caution when moving the
cart/apparatus combination to avoid
injury from tip-over.

12. Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has been
damaged in any way, liquid has been spilled or
objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.

13. Do not expose this equipment to dripping or

splashing and ensure that no objects filled with
liquids, such as vases, are placed on the
equipment.

14. WARNING: When this Loudspeaker is

connected to an amplifier that is Powered On,
the connection terminals may have hazardous
live voltages present with a risk of electric
shock.

15. CAUTION: When this Loudspeaker is

assembled it weighs 452 pounds (205.0 kgs). It
requires four or more persons to safely move
the Loudspeaker.

Summary of Contents for XRT2K

























Reviews: