McIntosh XRT1K Owner'S Manual Download Page 2

2

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a non-abrasive dry soft cloth.

7.  Install  in  accordance  with  the  manufacturer’s 

instructions.

8.  This  Loudspeaker  is  capable  of  producing 

extremely  high  sound  pressure  levels,  even 

when  connected  to  amplifiers  of  moderate 

power  output.  User  caution  is  advised.  Ear 

protection  is  recommended  when  playing  at 

high  volumes  as  continued  exposure  to  high 

sound  pressure  levels  can  cause  permanent 

hearing  impairment  or  loss.  The  use  of  a 

Sound  Level  Pressure  Meter  will  greatly  aid 

in  determining  when  high  volume  levels  are 

occurring.

9.  Do  not  install  near  any  heat  sources  such  as 

radiators, heat registers, stoves, or other apparatus 

(including amplifiers) that produce heat.

10. Only use attachments/accessories specified by the 

manufacturer.

11. Use only with the cart, stand, tripod, bracket, or 

table specified by the manufacturer, 

or  sold  with  the  apparatus. 

When  a  cart  is  used,  use  caution 

when  moving  the  cart/apparatus 

combination  to  avoid  injury  from 

tip-over.

12. Refer all servicing to qualified service personnel. 

Servicing  is  required  when  the  apparatus  has 

been damaged in any way, liquid has been spilled 

or  objects  have  fallen  into  the  apparatus,  the 

apparatus has been exposed to rain or moisture, 

does not operate normally, or has been dropped.

13.  Do  not  expose  this  equipment  to  dripping  or 

splashing  and  ensure  that  no  objects  filled 

with  liquids,  such  as  vases,  are  placed  on  the 

equipment.

14.  WARNING:  When  this  Loudspeaker  is 

connected to an amplifier that is Powered On, 

the connection terminals may have hazardous 

live  voltages  present  with  a  risk  of  electric 

shock.

15.  CAUTION:  When  this  Loudspeaker  is 

assembled it weighs 168 pounds (76.2 kgs). It 

requires three or more persons to safely move 

the Loudspeaker.

WARNING - TO REDUCE RISK OF 

FIRE OR ELECTRICAL SHOCK, DO 

NOT EXPOSE THIS EQUIPMENT TO 

RAIN OR MOISTURE.

NO USER-SERVICEABLE PARTS 

INSIDE. REFER SERVICING TO 

QUALIFIED PERSONNEL.

To prevent the risk of electric shock, do not remove cover or 

back. No user-serviceable parts inside.

IMPORTANT SAFETY 

INSTRUCTIONS!

PLEASE READ THEM BEFORE 

OPERATING THIS EQUIPMENT.

Summary of Contents for XRT1K

















Reviews: