Tiptoes
Glides
Figure 2
Assembling the Column
10. Using the supplied Allen Wrench, remove two screws
from each side of the Loudspeaker Bottom. Refer to
figure 1.
11. Remove the Front Cover from the Column Base and
set it aside.
12. Orient the Column Base so the metal extrusion lines
up with the Loudspeaker System extrusion.
13. Attach the Column Base to the Loudspeaker System
using the four supplied machine bolts and washers.
Refer to figure 1.
14. Align the Grille fastening pins to the Column Grom-
mets (there are four pins on each side). Carefully
push down to secure the Grille to the Loudspeaker.
15. Reattach the previously removed Front Cover to the
Column Base.
Optional Feet
16. One set of optional feet (eight Tiptoes and eight
Glides) are supplied with the ST27 Column Base. To
prevent crushing carpet use
the Tiptoe Spikes; to protect
non-carpeted flooring use
the Chrome Glides. Both the
Glides and Tiptoes have a
threaded shaft and locking
nut that screw into the
tapped holes in the bottom
of the ST27’s base rails. The
feet can be independently adjusted to compensate for
uneven flooring. Refer to figure 2.
17. Stand the Column upright.
18. Proceed to page 10 of the XR27 Owner’s Manual for
placing the XR27 Loudspeaker System in a room.
McIntosh Part No. 040886
McIntosh Laboratory, Inc.
2 Chambers Street
Binghamton, NY 13903
