11
Connecting Components
"
Computer
Tuner
Left Loudspeaker
Right Loudspeaker
Connect to
AC Outlet
3. Rotate the Output Terminal Post clockwise until it is
] -
ing the McIntosh Wrench, rotate the top
of the Output Terminal one quarter of a
*~= %
Do not over tighten.
Refer
\
4. Referring to figure K, connect the
Loudspeaker hookup cables with banana
plugs into the hole at the top of the
terminal to the MXA80 Negative
Output Terminal and Positive Out-
put Terminal to the Loudspeaker
Terminal Connections being careful
to observe the correct polarities.
Refer to “General Information” Note 7 on page 4
for additional information.
5. Connect the MXA80 power cord to an active AC
outlet.
Spade Lug or Wire Connections:
6. Connect the Loudspeaker hookup cables between
to the MXA80 Output Terminals and Loudspeaker
Input Terminals for both channels. Be careful to
observe the correct polarities (Positive and Nega-
% -
nector or prepared section of the cable end into the
terminal side access hole, and tighten the terminal
cap until the cable is firmly clamped into the ter-
minals so the lugs or wire cannot slip out. Refer to
figures L and M.
Refer to “General Infor-
mation” Note 7 on page
4 for additional informa-
tion.
7. Connect the MXA80 power cord to an active AC
outlet.
-
+
-
+
Figure I
Figure J
Figure K
Figure L
Figure M
Red
Black
Red
Black
Disc Player
Summary of Contents for MXA80
Page 9: ...9 Notes...
