12
McIntosh CR12 Multizone Controller
How to Connect Multizone, Control and
Antenna Components
How to Connect Multizone, Control and
Antenna Components
McIntosh Remote AM Antenna
McIntosh
WK-3
Keypad
McIntosh HC-1
Home Controller
To AC outlet
McIntosh Power Controller
McIntosh RFD2 AC-3
RF Demodulator
FM Antenna
McIntosh Laser Video Disc Player
IR Sensor
1.Connect the MX132 to a live AC outlet.
2. Connect the Remote AM antenna by plugging the DIN
connector of the supplied 3 conductor cable into the
AM ANT, DIN socket on the back panel of the
MX132. Connect the other end of the cable to the ter-
minals on the Remote AM antenna according to the
color code shown below:
Wire Color
Connecting Terminal
Red
TV
Black
RF
Green
GND
3. Connect a cable from the MX132 LV (8) data port to
the MLD7020 Control Out jack.
4. Connect a cable from the MX132 Home data port to
the data input of an HC-1 Home Controller.
5. Connect a cable from the MX132 A Power Control
jack to the Power Control In jack on a McIntosh RFD2
AC-3 RF Demodulator.
6. Connect a DIN cable from the MX132 Multizone jack
to the DIN Multizone jack on a McIntosh PC-3 Power
Controller.
7. Connect a 4 conductor shielded cable from the MX132
Zone A Keypad terminals to a WK-3 or WK-4 keypad.
8. Connect a shielded straight through 37 conductor,
DB37 cable from the MX132 To Multizone Connec-
tor to the CR12 Multizone Controller Input B
socket.
9. Connect a 75 ohm coax cable from an FM antenna or
cable system to the MX132, 75 ohm FM ANT connec-
tor.
www.eskonline.nl
