8
Right Crossover
Network
Left Crossover
Network
How to Connect a Two Way System
How to Connect a Two Way System
McIntosh Stereo
Power Amplifier
Left Woofer/Midrange
Right Woofer/Midrange
Right Tweeter
Left Tweeter
+
-
+
-
Figure 9
BiAmp Jumpers
- 6 dB Jumper
1. Press the connector ends of the supplied Woofer/
Midrange Red/Black cables onto the matching Woofer/
Midrange connecting lugs. Connect the Tweeters in a
similar manner.
2. Attach the tinned ends of the two Red/Black Woofer/
Midrange cables to the Crossover Network WOOFER
OUTPUT terminals. The Black wire connects to a MI-
NUS (-) terminal and the Red wire to a PLUS (+) ter-
minal.
3. Attach the tinned ends of the two Red/Black Tweeter
cables to the Crossover Network TWEETER terminals.
The Black wire connects to a MINUS (-) terminal and
the Red wire to a PLUS (+) terminal.
4. Connect the MINUS (-) OUTPUTS of a McIntosh
Power Amplifier to the MINUS SINGLE AMP
WOOFER INPUT Crossover Network terminals and
the PLUS (+) OUTPUTS to the PLUS (+) SINGLE
AMP TWEETER Crossover Network terminals.
5. An optional modification to the Crossover Network
produces a 6dB reduction in Tweeter level. When fac-
ing the ter-
minal side
of the
crossover,
cut the
wire loop
located on
the right
side of the
crossover.
Refer to
figure 9.
