7
Rear Panel Switches and Connections
BACK2 OUTPUTS provide
the audio output signals to
the power amplifier inputs
for the Left and Right Back
Surround Loudspeakers
SURRound Outputs
provide the Left and
Right Surround Sig-
nals to the power am-
plifier driving the
Surround
Louspeakers
AUTOmatic switches the
built-in calibration test
signal to each of the Sur-
round Loudspeakers in 2
second intervals on a con-
tinuous basis. MANual
system calibration requires
the manual selection of
Surround Loudspeakers
SPEAKER SETTINGS
switches allow the selection
of one or two Back Surround
Louspeakers, their frequency
response capability and
whether or not an optional
Secondary Subwoofer is used
in the system
Connect the MSE1
power cord to a live AC
outlet. Refer to informa-
tion on the back panel of
the MSE1 to determine
the correct voltage
POWER CONTROL IN
jack accepts a turn-on sig-
nal from a McIntosh Con-
trol Center. The POWER
CONTROL OUT jack
sends the turn-on signal to
another McIntosh product
DATA IN jack receives control
data from a McIntosh A/V Con-
trol Center and the DATA OUT
jack provides the control data
for the next McIntosh Compo-
nent
The SUBWOOFer OUT-
PUTS feed an audio signal to
the input on a power ampli-
fier for the optional second-
ary Subwoofer
BACK1 OUTPUT provides
the audio output signal to the
power amplifier input for the
Back Surround Loudspeaker
ANALOG INPUT receives
Left and Right Surround
Signals from the McIntosh
A/V Control Center