background image

2

3

The lightning flash with arrowhead, 

within an equilateral triangle, is 

intended to alert the user to the 

presence of uninsulated “danger

-

ous voltage” within the product’s 

enclosure that may be of sufficient 

magnitude to constitute a risk of 

electric shock to persons.

The exclamation point within an 

equilateral triangle is intended to 

alert the user to the presence of im

-

portant operating and maintenance 

(servicing) instructions in the litera

-

ture accompanying the appliance.

WARNING - TO REDUCE RISK OF 

FIRE OR ELECTRICAL SHOCK, DO 

NOT EXPOSE THIS EQUIPMENT TO 

RAIN OR MOISTURE.

NO USER-SERVICEABLE PARTS 

INSIDE. REFER SERVICING TO 

QUALIFIED PERSONNEL.

To prevent the risk of electric shock, do not remove cover or 

back. No user-serviceable parts inside.

CAUTION - 

Invisible Laser Radiation when open. DO 

NOT stare into the beam or view directly 

with optical instruments. Use of controls 

or adjustments or performance of proce-

dures other than those specified in the 

Owners Manual may result in Hazardous 

Radiation Exposure.

LUOKAN 1 LASERLAITE

KLASS 1 LASER APPARAT

VAROITUS!

VARNING!

Laitteen kayttaminen muulla kuin 

tassa kayttoohjeessa mainitulla 

tavalla saattaa altistaa kayttajan 

turvallisuusluokan 1 ylittavalle 

nakymattomalle lasersateiiylle.

Om apparaten anvands pa annat satt 

an i denna bruksanvisning specifi-

cerats, kan anvandaren utsattas for 

osynbg laserstraining, som overskrider 

gransen for laserklass 1.

This product incorporates an embedded

CLASS 3R Laser (IEC60825-1).

Summary of Contents for MCD500

























Reviews: