McIntosh MCD350 Owner'S Manual Download Page 19

19

The MCD350 has two MP3/WMA Modes of Opera-

tion: Disc Mode and Folder Mode. Refer to figures 37 

and 38.

Select the desired mode by pressing the MODE Push-

button on the Remote Control.

The Disc Mode will play back all the tracks on the 

disc starting with tracks not in folders first, followed 

by the track contained in the folder second. The Folder 

Mode will playback the tracks contained in the se-

lected folder. Refer to figure 39.

 1. Press the PLAY/PAUSE

„

/

;

 Push-button to start 

Playback. Refer to figure 40.

After all the tracks have been played the MCD350 

will stop.

Note: Use the ▲ up and ▼ down directional Push-

buttons to select folders on the disc.

Note: To view and/or delete the selections pro-

grammed, use the 

TRACK NEXT 

:

 

Push-button to step through programmed 

tracks and the CLEAR Push-button to re-

move any unwanted selections.

4. To start playback of the just entered program, 

press the PLAY/PAUSE

„

/

;

 Push-button. Refer 

to figure 35. 

After playback begins, the Repeat Mode can be 

activated to provide continuous playback of the 

Programmed Track(s). Refer to figure 25.

Note: To momentarily stop playback, press the 

PLAY/PAUSE

„

/

;

Push-button. To re-

sume Program Playback press the PLAY/

PAUSE

„

/

;

 Push-button.

5. To cancel the Program Playback Mode, press the 

STOP

<

 Push-button followed by pressing the 

RANDOM Push-button.

Once the Program Playback Mode is active, tracks 

may be added or deleted by first pressing the STOP

<

 

Push-button followed by entering the additional tracks 

using the Numeric Push-buttons or delete the last 

track programed by using the CLEAR Push-button.

MP3/WMA Disc Playback

The MCD350 has the ability of playing back MP3 

and WMA encoded discs. MP3 and some version of 

WMA coding allow more tracks on the Disc by us-

ing the technique of lossy compression applied to the 

original audio information. These Tracks have lower 

audio quality than the original recording. Load a MP3/

WMA disc into the MCD350. Refer to figure 36.

How to Operate the MCD350, con’t

will first indicate track 6 followed by indicat-

ing the total number of tracks and total playback 

time for the current program. Refer to figures 29      

and 30.

3. In a similar manner, enter the remaining Tracks 4 

and 2. Refer to figures 31 thru 34.

1 2           5 8 m 3 2 s

Figure 28

  4               m     s

Figure 31

  2             8 m 2 8 s

Figure 32

  2               m     s

Figure 33

  3             1 5 m 5 3 s

Figure 34

  6             0 m 0 3 s

Figure 35

  6               m     s

Figure 29

  1             4 m 5 9 s

Figure 30

Figure 36

D I S C                     1 0

D I S C   M O D E

Figure 37

F O L D E R   M O D E

Figure 38

1   m p - 3

Figure 39

Figure 40

  4             2 m 1 5 s

Summary of Contents for MCD350

























Reviews: