McIntosh MCD1100, Owner'S Manual

Page: 16 / 24

16
Figure 6
Power On and Off
The Red LED above the STANDBY/ON Push-button
lights to indicate the MCD1100 is in Standby mode.
To Switch ON the MCD1100, press the STANDBY/
213XVKEXWWRQRQWKH)URQW3DQHORUWKH3RZHU
Push-button on the Remote Control. Refer to figures
6 and 16. To switch OFF the MCD1100 press the
STANDBY/ON Push-button on the Front Panel or the
OFF Push-button on the Remote Control.
Note: When AC Power is initially applied to the
MCD1100 the unit will momentarily switch On
and then go into the Standby Mode.
How to Load and Unload a Disc
1. Press the STOP/OPEN / c Push-button. The disc
tray will slide out allowing a disc to
be loaded. Refer to figure 1.
2. Press the STOP/OPEN / c
Push-button and the disc tray will
close. Refer to figures 6, 2, 3
and 5. Loading of disc’s Table of
&RQWHQWVQXPEHURIWUDFNVZLOO
be indicated on the Front Panel
Information Display. When a
SACD Disc is loaded, the
Front Panel Display will
scroll the Album Title first
and then display the number
of tracks. Refer to figures
4 and 5.
Note: When a Disc is placed
in the tray and the
PLAY/PAUSE Push-but-
ton is pressed, the tray
will close and the first
track will start playing.
3. Press the STOP/OPEN /
c Push-button once to stop
playback of the disc. Press the STOP/OPEN Push-
button again and the disc tray will open.
+RZWR3OD\D6$&''LVF
With a disc already loaded into the MCD1100, press
the PLAY/PAUSE
f
/ Push-button on the Front Panel
of the MCD1100 or Remote Control. Refer to figures
6 and 16. The Disc will start playing the first track of
the SACD Layer.
To change from the default SACD Layer to CD
Layer, press the DISK LAYER
Push-button once to see the cur-
rent selection and a second time
to change the selection. Refer to
figures 6, 7, 8 and 16.
The Player will load the CD Table of
Contents (Number of tracks and Total
3OD\LQJ7LPHDWWKLVWLPH7RVWDUW
playing the CD Layer press the PLAY/
PAUSE
f / Push-button.
Notes: 1. Changing between the SACD and CD Layer
can be accomplished at any time by perform-
ing the above procedure.
2. The default setting for SACD/CD Hybrid is
to play the SACD Layer. The default setting
may be changed to play the CD Layer instead.
With the MCD1100 On and no disc loaded,
press the SACD/CD Push-button until the
Front Panel
Display indi-
cates CD. Refer
to figures 6, 9, 7
and 8.
3. Some SACD Disc(s) have the ability of dis-
playing the Album Title and Artist. With the
disc loaded, SACD Table of Contents read
and the
disc stopped , press the MENU/TEXT
Push-button once for scrolling the Title and
twice for scroll-
ing the Artist
Name. Display
of the Artist in-
formation is not
available dur-
ing playback of
the disc. Refer
to figures 10
and 11.
How to Operate the MCD1100
Figure 5
1 2 T r
Figure 4
T I T L E : D
Figure 1
O P E N
Figure 3
R E A D I N G
Figure 2
C L O S E
Figure 10
T I T L E : D
Figure 11
A R T I S T : J
S A - C D
Figure 7
Figure 8
C D
Figure 9
N O D I S C