7. Programming is not working properly.
• The disc is dirty or badly scratched. Clean the disc
or try programming with a scratch-fee disc.
• The microprocessor has not processed the
commands properly. Clear the program by
touching STOP and store it again; re-start play.
• All 20 memory places are already programmed and
you have missed the ERROR sign that shows this.
Check by touching the REVIEW button to ensure
the program memory.
8. The following problems can be caused by the same
circumstances:
Playback does not begin with the first track on
the disc or of the program, but with another track.
Playback stops before the end of the disc or the
program.
• The microprocessor has not processed the
command correctly. Touch STOP and re-start to
clear the memory.
• The disc is dirty or badly scratched. Clean the disc
or use another, clean, scratch-free disc.
• The disc is defective. Try another disc.
• There is an unwanted object in the disc drawer
such as a piece of paper or a remnant of
packaging.
• The player is not horizontal.
9. The player does not react to commands from the
remote control.
• The batteries are low and the distance to the
player is too great. Aim in the direction of the
player.
• Direct sunlight or high intensity room light
shining on the remote sensor. Shade the sensor
from sunlight.
• The batteries are dead.
HELPFUL HINTS 15
