McIntosh MC7104, Owner'S Manual

Page: 15 / 20

POWER OUTPUT, 4 CHANNELS
100 watts into 4 ohm loads, minimum sine wave continuous average power output per
channel, all channels operating. The RMS voltage is 20V across 4 ohms.
POWER OUTPUT, MONO/BRIDGED PAIRS
200 watts into 8 ohm loads, minimum sine wave continuous average power output per
channel pair. The RMS voltage is 40V across 8 ohms.
OUTPUT LOAD IMPEDANCE
NORMAL, (4 channels): 8, 4 or 2 ohms
BRIDGED/MONO pairs: 8 or 4 ohms
RATED POWER BAND
20Hz to 20,000Hz
TOTAL HARMONIC DISTORTION
0.005% maximum harmonic distortion at any power level from 250 Milliwatts to rated power
per channel from 20Hz to 20,000Hz, all channels operating.
DYNAMIC HEADROOM
1.8dB
FREQUENCY RESPONSE
+0, -0.25dB from 20Hz to 20,000Hz
+0, -3.0dB from 10Hz to 100,000kHz
INPUT SENSITIVITY
1 volt, (2.5V at level control center detent)
INPUT IMPEDANCE
20,000 ohms
A-WEIGHTED SIGNAL TO NOISE RATIO
88dB, (108dB below rated output)
INTERMODULATION DISTORTION
0.005% maximum if instantaneous peak power output does not exceed twice the output rating
per channel, with all channels operating, for any combination of frequencies from 20Hz to
20,000Hz
13
SPECIFICATIONS