background image

TAKE ADVANTAGE OF 3 YEARS OF CONTRACT SERVICE. . .

FILL IN THE APPLICATION NOW.

Your MC7100 Power Amplifier will give you many years of satisfactory performance. If you

have any questions, please contact,

Mclntosh Laboratory Inc.

2 Chambers Street

Binghamton, New York 13903-2699
Phone: 607-723-3512

McINTOSH

THREE YEAR

SERVICE

CONTRACT

An application for A THREE YEAR SERVICE CONTRACT is included with this manual.

The terms of the contract are:

1. If the instrument covered by this contract becomes defective, Mclntosh will provide all parts,

materials, and labor needed to return the measured performance of the instrument to the

original performance limits free of any charge. The service contract does not cover any

shipping costs to and from the authorized service agency or the factory.

2. Any Mclntosh authorized service agency will repair all Mclntosh instruments at normal

service rates. To receive the free service under the terms of the service contract, the ser-

vice contract certificate must accompany the instrument when taken to the service agency.

3. Always have service done by a Mclntosh authorized service agency. If the instrument is

modified or damaged as a result of unauthorized repair the service contract will be cancell-

ed. Damage by improper use or mishandling is not covered by the service contract.

4. The service contract is issued to you as the original purchaser. To protect you from

misrepresentation this contract cannot be transferred to a second owner.

5. Units in operation outside the United States and Canada are not covered by the Mclntosh

Factory Service Contract, irrespective of the place of purchase. Nor are units acquired

outside the USA and Canada, the purchasers of which should consult with their dealer

to ascertain what, if any, service contract or warranty may be available locally.

4

Summary of Contents for MC7100





















Reviews: