background image

7

General Information, Cable Information, Introduction and Performance Features 

Introduction

Now you can take advantage of traditional McIntosh 

standards of excellence in the MC2152 Tube Power 

Amplifier. The 150 watt power output per channel 

will drive any high quality Loudspeaker System. The 

MC2152 reproduction is sonically transparent and ab-

solutely accurate. The McIntosh Sound is “The Sound 

of the Music Itself.”

Performance Features

• Power Output

The MC2152 is a Tube Power Amplifier with a ca-

pability of 150 watts per channel into 2, 4 or 8 ohm 

Loudspeakers with less than 0.5% distortion. 

• Unity Coupled Circuitry

The MC2152 Power Amplifier uses the famous McIn-

tosh Patented Unity Coupled Circuit which provides 

low distortion, extended frequency response and cool 

operating output tubes.

• Multifilar Wound Output Transformer

The MC2152 Output Transformer Windings are part 

of the Unity Coupled Circuitry. There are two bifilar 

wound primaries, one for the cathodes and one for 

the plates. The secondary winding is wound together 

with the primary windings. This provides very close 

primary to secondary coupling. The result is flat fre-

quency response and wide power bandwidth.

• Balanced and Unbalanced Input

Balanced connections guard against induced noise and 

allow long cable runs without compromising sound 

quality.

• Sentry Monitor Tube Protection

McIntosh Sentry Monitor Tube Protection Circuits 

ensure the MC2152 will have a long and trouble free 

operating life.

• Vacuum Tube Sockets

Small Signal Vacuum Tubes Sockets have Ceramic 

Base construction with gold plated contacts, providing 

protection from atmospheric contamination. Output 

Tube Sockets include Air-Pipe cooling at their bases 

for long term operation.

• Amplifier Gold Plated Connectors

Gold Plated Input Jacks and Output Binding Posts 

provide trouble free connections.

• Special Power Supply

A regulated Power Supply, a very large core Power 

Transformer and large capacitors ensure stable noise 

free operation even though the power line varies.

• LED Tube Illumination

Tri-Color LEDs illuminate the small signal process-

ing tubes of the MC2152. They indicate tube warm up, 

normal and sentry monitor modes of operation.

• Special Chassis

The Aluminum Extrusion Heavy Duty Chassis is a 

Highly Rugged Construction for the very large size 

of the MC2152 McIntosh Tube Power Amplifier. This 

type of design will retain the pristine beauty of the 

MC2152 for many years to come.

Summary of Contents for MC2152





















Reviews: