INSTALLATION
CONNECTIONS TO YOUR MAC 17OO
CONNECTING THE PHONO 1 POSITION for your main record player
Connect the "left" channel to the "L" input of PH 1. Connect
the "right" channel to the
l l
R" input of PH 1. If your record
player has a ground wire connect the ground wire to GND.
CONNECTING THE PHONO 2 POSITION
Phono 2 position can be used if two record players are used in
a system. Connect the "left" channel to the " L " input of PH 2.
Connect the "right" channel to the "R" input of PH 2.
CONNECTING TAPE PLAYER (no preamplifier in tape player)
Use this position only for a tape deck with no electronics. Con-
nect the "left" channel to the " L " input of TAPE HD. Connect
the "right" channel to the "R" input of TAPE HD.
CONNECTING A TAPE RECORDER or TAPE PLAYER with BUILT-IN ELECTRONICS
Connect the "left" channel of the tape player or tape recorder
to the "L" channel TAPE MONITOR input. Connect the "right"
channel of the tape player or tape recorder to the "R" channel
TAPE MONITOR input.
CONNECTING A TAPE RECORDER WITH THREE HEADS
Connect the tape outputs of the MAC 1700 to the high level
inputs on the tape recorder. This will make it possible for you to
record from the MAC 1 700. Connect the tape recorder outputs
to the TAPE MON inputs on the MAC 1 700. Use TAPE MON . . .
In for listening to pre-recorded tapes as well as to monitor.
CONNECTING A TAPE RECORDER TO RECORD FROM THE MAC 1700
Connect the TAPE OUTPUTS of the MAC 1700 to the high level
inputs on the tape recorder.
7
